PLC400 Ethernet PLC Controller Compact Industrial I/O Module Compatible with Codesys Wide Temp Operation

GCANPLC400 Codesys Ethernet Controller 1 pcs Compact digital and analog input/output module for industrial control applications Key features Function: Ethernet controller for digital and analog I/O, designed to improve conversion rates between field signals and controller data. Protocols: Supports Modbus TCP and Modbus RTU for easy integration with existing networks. Software compatibility: Supports Codesys runtime; programming with OpenPCS. I O capacity: Up to 256 digital inputs and outputs and 60 analog inputs and outputs. Bus expansion: Supports up to 32 bus terminal modules. Profibus exchange capacity configured at 32 bytes input and 32 bytes output. Physical: Compact size 100 mm x 69 mm x 8 mm; weight 500 g. Power and current: Nominal 24 V supply (18 to 30 V). Input current 70 mA plus total GCbus current, maximum 2.5 A. Starting current approximately 2.5 times continuous current. GCbus current supply 500 mA. Power supply limit 24 V DC, maximum 10 A. Bus interface: RJ45 Ethernet port. Configuration: Automatic configuration to reduce setup time. Isolation and reliability: Electrical isolation 1000 Vrms between power contact and buscoupled power voltage. Environmental: Operating temperature range 40 to 85 degrees C. Operating humidity up to 95 percent RH without condensation. Wireless: No wireless function. concern chemical: none. Benefits and why you need it density I O in a compact module lets you consolidate field signals and reduce cabinet space. Standard industrial protocols and Codesys compatibility simplify integration into existing control systems and reduce engineering time. Automatic configuration and RJ45 Ethernet connectivity speed deployment and reduce commissioning errors. Wide operating temperature and strong electrical isolation provide stable operation in demanding industrial environments. Clear power and GCbus current specifications help you design power distribution and expansion modules reliably. Typical applications Factory automation: Expand I O on a production line to collect up to 256 digital signals and 60 analog channels for machine control and monitoring. Building automation and energy management: Centralize sensor and actuator signals for HVAC, lighting, and metering via Modbus TCP to a supervisory controller. Test benches and machine retrofits: Add Ethernetbased I O to legacy equipment for data acquisition and control without replacing existing PLCs. What is included 1 pcs GCAN Ethernet Controller digital/analog input/output module, model GCANPLC400 Codesys. Technical summary Model: GCANPLC400 Codesys Protocols: Modbus TCP and Modbus RTU Digital I O: 256 input/output Analog I O: 60 input/output Bus modules: up to 32 Profibus bytes: 32 bytes input and 32 bytes output Interface: RJ45 Power: 24 V (18 to 30 V) Input current: 70 mA + total GCbus current, max 2.5 A Starting current: about 2.5 times continuous current GCbus current supply: 500 mA Power supply max: 24 V DC / max 10 A Electrical isolation: 1000 Vrms Size: 100 mm x 69 mm x 8 mm Weight: 500 g Configuration: Automatic Operating temperature: 40 to 85 degrees C Working humidity: 95 percent RH, without condensation Software: Codesys; programming software OpenPCS This controller is intended for industrial control integration where compact form factor, I O capacity, protocol compatibility, and reliable power and isolation characteristics are required.