6 10/100M nets port, using RJ45 interface (access) 2pcs 10/100M port RJ45 interface (). It is applied in industrial control, weak network system integration project, the LAN is built up quickly, and Ethernet development. Monitoring, alarm, broadcasting, entrance , video intercom, parking lot, , power, and other network digital weak current system engineering. Standard: IEEE 802.3/IEEE 802.3U/IEEE 802.3z/IEEE 802.3x/IEEE 802.1P ANSI/IEEE STD 802.3 10/100M Adaptive Agreement: CSMA / CD, / IP Model: -AD6F-2C Cables: unshielded pair (UTP) or shielded pair (STP), 5 or Cat6 categories, maximum length 100m Fiber optic cable: optical wavelength: 850nm / 1310nm / 1550nm Single mode single fiber: 25-120KM Single mode double fiber: 25-120KM Port: 6pcs 10/100M Internet access, using RJ45 connector to connect to two 10/100M Internet access, RJ45 connector (). Network sequence: 4 100M 1 orange white 2 Orange 3 Green white 6 green POE mode: 3-8 ports support constrained POE non-protocol power supply 4 Blue 5 blue white power positive (+), 7 Brown White 8 Brown negative (-), need to be used with cable separator Connection and transmission mode: 100M net electric hybrid power transmission: 100M RJ45 Internet access Flow control: full duplex 1EEE802.3x flow control; half duplex back pressure flow control. Transmission mode: and forward Exchange level: 2 level After bandwidth: 1G address : 4K Delay rate: 9.6us BER: Less than 1000000000/1 Power input range: DC 6V - 56V Machine power consumption: Less than 5W MTBF:10 hours Working temperature: -40~ -70 Celsius Storage temperature: -40~ -80 Celsius Humidity: 5%~90% without condensation Colour:black Material:plastic Size:125 x 70 x 25mm Package Contents: 1 x Only above package content, other are not included. Note: Light and different displays may cause color of item in a little different from real . The measurement allowed is +/- 1-3cm.