Thermostat Socket Programmable Digital Timer Digital Programmable Socket with Probe Digital Timer Socket Heating Thermostat Socket for Greenhouse About this item: Intelligent Temperature Controller: Temperature range: -40 - 120 , Temperature control accuracy: 1 percent . The temperature controller socket can automatically switch to heating and cooling modes and control heating or cooling during work by setting the start and stop temperature equipment. Various functions: The LCD screen can display the temperature control mode and 4 timing modes F01-F04. And with temperature correction function, screen lock protection, storage function (all current settings are saved after power off). Intelligent Time Control: This socket thermostat outlet can detect temperature, set on and off temperature, and has the functions of cycle time control, on timing, off timing, and timing switching. Time Range: Range: 0-99 hours and 59 minutes, Time Accuracy: Up to 10 minutes. Maximum Load: 16A (2), 3680W. 1.8m Temperature Probe: The socket thermostat outlet comes with a 1.8m wired temperature probe for connection to the measuring point, with a temperature detection range of -40 to - and120 . Multiple uses: The digital temperature controller socket can intelligently control temperature and time. It is widely used in household wall-mounted heating and other places such as greenhouses, aquariums, carbon crystal heaters, thermostat switches, mobile air conditioners, and intelligent aquaculture control. Product Description: Specification: 1. Rated voltage: 230VAC 50HZ. 2. Rated load: MAX 16A 3680W. 3. Temperature range: -40 - 120 . 4. Temperature control error: 1 percent . 5. Temperature display resolution: 0.1 . 6. Timing error: MAX 10 minutes. F01: Cycle timing mode Press the MODE key to switch to F01. Press the SET button to set the ON value (start hour or minute) and the OFF value (stop hour or minute). The ON value is the system working time and the OFF value is the system stopping time. This mode is the cycle time, which can control the system to work intermittently. F02: Timing mode on: Press the MODE key to switch to F02. Press the SET button and set the hours or minutes. In this mode, the system is controlled to operate at the specified time. For example, if CD ON is set to 30 minutes, the countdown will start and the system will automatically start after 30 minutes. F03: Timer Mode: Press the MODE button to switch to F03. Press the SET button and set the hours or minutes. In this mode, the system is controlled to stop at the specified time. For example, if you set CD OFF to 30 minutes, the countdown will start and the system will automatically stop after 30 minutes. F04: Timer On or Off Mode: Press the MODE button to switch to F04. Press the SET button and set the CD ON value (hour or minute) and CD OFF value (hour or minute). In this mode, the system is controlled to start and stop at the set time. For example, if you set CD ON to 30 minutes and CD OFF to 40 minutes, the system will start working after 30 minutes, and when the system starts working, it will stop working after 40 minutes. Note: Due to the light and screen setting difference, the item's color may be slightly different from the pictures. Please allow slight dimension difference due to different manual measurement.