Compared to similar products, this CPU contact frame uses four-sided flat pressure instead of multi-point pressure for precise positioning, avoiding capacitors and improving CPU fixation. The contact surface with the motherboard is a flat bottom, and the original LOTES insulation protection pads with the same specifications are used to reduce pressure on the motherboard and further reduce signal interference. The metal side is raised to reduce signal interference on the motherboard side. Anodized sandblasting is made of all-aluminum alloy CNC precision. Color: Black Material: Aluminum alloy This product only supports Intel 12th generation CPUs with LGA1700 socket and H610 B660 Z690 series chipsets. Installation process: 1. Place the motherboard horizontally on the desktop and open the CPU clip. 2. Use the included T20 Torx screwdriver to remove the top part and set the bottom bracket aside. 3. Insert the processor into the socket. 4. Cover the enhanced buckle on the processor's top cover and move it slightly until it clicks into place. 5. Tighten the screws in a half circle in the opposite corners. Each screw alternates in a half and a half circle in diagonal order until the screw is on, will press unevenly on the CPU. Package Contents: 1 x Anti-bend frame 1 x L-shaped screwdriver Only the above package content, other products are not included. Note: Light and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm. Attention: Please pay attention to your shipping address when purchasing products. If your receiving information (e.g. name, street, house number, doorbell/email no name etc.) is incorrect, the order will not be delivered correctly.