Feature: 1. The most basic circuits based on MCU are onboard, such as crystal oscillator circuit, power conversion circuit and USB port. The core board leads to commonly used I/O resources. 2. Added EEPROM, memory card/Mrico memory card and SPIFlsh peripherals, and reserved NandFlash peripheral pads to expand the storage circuit. 3. The SWD simulation debugging download interface is lead out, and the debugging simulation downloader downloads, convenient and simple. It uses the Mirco USB interface commonly used in smart phones, which is easy to use and can be used for USB communication and power supply. 4. A low-load RTC crystal oscillator solution is adopted, which largely avoids the problem of RTC not vibrating due to the use of cheap cylindrical crystal oscillators. 5. Equipped with high‑quality 2.54mm pitch double‑row pin headers to ensure excellent electrical contact, which is convenient for users to place the core board on the marked universal board or breadboard. Users can choose the welding direction according to their actual needs. Specification: Item Type: Development Board Material: PCB Purpose: Suitable for operation learning and development of college students, engineers, technicians, factories, individual DIY, electronic enthusiasts, etc. Number Of Pins: 114 Core: ARM 32-bit Cortex-M1+FPU Working Frequency: 168MHz Storage Source: 1021K Byte Flash, 192KBvte RAM Interface Source: 3 x SPI, 4 x USART, 2 x UART, 3 x 12C, 2 x CAN, 114 x I/O port, 2 x USB (OTG), 1 x SDIO, 2 x I2S, 1 x 10/100 Ethernet Media Access Controller, 1 x DCMI (digital camera interface)Analog-to-Digital Conversion: 3 x ADC (12 bits/21 channels) Digital-to-Analog Conversion: 2 x DAC (12 bits/2 channels) Timer: 10 x general-purpose timer 2 x advanced timer 2 x basic timer Debug Download: Support JTAG/SWD debug download through port Working Voltage: 1.8-3.6V SWD Interface: Support simulation, download and debugging Reset Button: Used for the user to reset the chip program BOOT Setting (" 1 "for The Letter End, " 0 " for The Number end, and " 0 " for factory default) There are three ways: User flash memory/SRAM/system memory User LED (PG15): Convenient for 1/0 output test or indicating program running status Power LED (PWR): Power indicator status, it can be judged whether the power is stable. Mirco USB Port: Power supply and USB communication function, does not support program download.. Package List: 1 x Development Board5 x Pin Header