Stfs-25 Water Flow Switch Npt Thread Connection Spdt Contacts 6-380v

73,81 €
envío GRATUITO

Stfs-25 Water Flow Switch Npt Thread Connection Spdt Contacts 6-380v

  • Marca: Unbranded
Vendido por:

Stfs-25 Water Flow Switch Npt Thread Connection Spdt Contacts 6-380v

  • Marca: Unbranded

73,81 €

En existencias
envío GRATUITO
Vendido por:

73,81 €

En existencias
envío GRATUITO

Aceptamos los siguientes métodos de pago

Descripción

1100% and high quality 2Used for sensing changes in the flow rate of liquids flowing through pipes, such as water, ethylene, ethylene glycol or other non-hazardous liquids. 3When the liquid flow exceeds or falls below the set flow rate, its single-pole double-throw switch contact (SPDT) can make one circuit conduct, while cutting off the other circuit. 4The flow switch is usually used in places where interlocking or 5STFS-25 fully sealed liquid flow switch can use different slurry according to the flow rate of installed pipeline. Features:100% and high quality Used for sensing changes in the flow rate of liquids flowing through pipes, such as water, ethylene, ethylene glycol or other non-hazardous liquids. When the liquid flow exceeds or falls below the set flow rate, its single-pole double-throw switch contact (SPDT) can make one circuit conduct, while cutting off the other circuit. The flow switch is usually used in places where interlocking or "cut-off" protection is required. STFS-25 fully sealed liquid flow switch can use different slurry according to the flow rate of installed pipeline.Specification:Wide voltage:6-380VPipe fittings: 1" 11-1/2NPTMaterial of bellows and blades: phosphorous bronze and stainless steelBlade: 1", 2", 3 ", 6"Liquid temperature () : -25-120Maximum liquid pressure: (bar) : 15Installation and adjustment:1. Open the flow switch housing;2. The switch has been set at the minimum flow value when leaving the factory. Increase the flow setting value and turn the adjusting screw clockwise;3. Press the target piece to check whether the micro switch can work normally. Excessive counterclockwise rotation of the adjustment screw may lead to the failure of the flow switch;4.After the installation, please press the flow switch to check the pulp bar several times. One , there is no "click" sound when the pulp bar returns.Turn adjusting screw clockwise until there is a "click" sound;5.The adjustment screw of black lacquer seal is only for factory to adjust the flow switch state, please do not change or adjust it;6. Observe three working cycles, make sure that the switch and the system connected with it are in normal operation, and cover the switch shell in time.Package list:1 x liquid flow switch1 x Chinese and English manual4 x target piece
  • Nº de Fruugo : 227404088-485056623
  • EAN: 889614560212

Entrega y devolución

Enviado en un plazo de 3 días

  • STANDARD: GRATIS - Entrega entre lun 10 noviembre 2025–vie 14 noviembre 2025 - GRATIS

Envío desde China.

Hacemos todo lo posible para asegurarnos de que se le entreguen los productos que pida en su totalidad y de acuerdo con sus especificaciones. Sin embargo, si recibe un pedido incompleto o artículos diferentes a los que pidió, o hay alguna otra razón por la que no está satisfecho con el pedido, puede devolver el mismo o cualquier producto incluido en él y obtener un reembolso completo por los artículos. Vea la política de devolución completa

Detalles de cumplimiento del producto

Consulte la información de cumplimiento específica de este producto que se describe a continuación.

La siguiente información es proporcionada por el minorista independiente que vende este producto.

Fabricante:
La información que se proporciona a continuación incluye los datos de contacto del fabricante del producto de referencia a la venta en Fruugo.

  • Fuzhouhaichengshengchangmaoyiyouxiangongsi
  • Fuzhouhaichengshengchangmaoyiyouxiangongsi
  • maweiqu junzhulu83hao kaifaqukejifazhanzhogxindalou disiceng E481shi
  • Fuzhou
  • CN
  • 350015
  • 755120680@qq.com
  • 8615280094726

Persona responsable en la UE:
La información que se proporciona a continuación incluye la información de contacto de la persona responsable en la UE. La persona responsable es el agente económico designado con sede en la UE responsable de las obligaciones de cumplimiento en relación al producto de referencia a la venta en la UE.

  • EC REP SERVICES SL
  • EC REP SERVICES SL
  • C/GRAN VIA 49, 7 DCH
  • MADRID
  • ES
  • 28013
  • ECREPSERVICE@HOTMAIL.COM
  • 34 910563102