Description: for SSA6G is a portable panoramic spectrum analyzer designed to display signal spectrum in the frequency range from 35MHz to 6200MHz. The analyzer finds the amplitude and frequency of components of the analyzed process. for spectrum analyzer is to find the signal amplitude for all widely used technologies: including Wi-Fi, 2G, 3G, 4G, LTE, CDMA, DCS, GSM, GPRS and GLONASS. Application: for SSA6G is primarily intended for field operation. The device is rugged and light with low energy consumption. It enables service centers and maintenance to perform on-the-spot HF analysis for commissioning and repair works. Moreover, the spectrum analyzer is a perfect solution for repair workshops and radio amateurs. Principle of Operation: The spectrum analyzer is a portable device which is connected to the measured circuit and has an power supply. The device has a 3.2Inch color resistive touch screen to display the signal spectrum and to control the device. The device is controlled by one of these three ways: 1. By buttons and touchscreen on the device; 2. By a smartphone or tablet for Android; 3. By a PC or laptop with for Limitations: The spectrum analyzer for SSA6G is not a measurement gauge, as it does not have an approved pattern of the measuring equipment. The approval of pattern of the measuring equipment has had a negative effect on the availability and price of the device. For this reason the spectrum analyzer is officially considered a field indicator. However, the device fully meets all technical requirements. Each device is calibrated against the power and frequency. Additional Information: Essentially, the device is "radio frequency multimeter" or "radio frequency explorer". The device is not for and other for products. Frequency bands are displayed only when it is working with devices for Android or . Frequency bands are not displayed on the screen of the device itself. For the correct operation of the software for need to have the OpenGl support of your equipment (version 2.1 and higher). Advantages: 3.2-inch color resistive touch screen Wide frequency range: 35 MHz to 6200 MHz Rapid scanning of the frequency range: . 500 µs per point High measurement precision: 2 dB within the dynamic range of 70-75 dB Compatibility with most devices for Android and computers for Possibility to use one device with the help of several smartphones/tablets/PCs Exceptionally easy to use in : the weight is as low as 400 g, dimensions are 155 x 81 x 27 mm, supply lasts up to 4 h of uninterrupted operation, wireless data transmission to the smartphone/tablet/PC. The device can be power by a smartphone/tablet/PC Note:Due to different factory batches, slight differences in appearance not affect the use. Colour:Black Material:Metal Package Contents: 1 x for SSA6G Spectrum Analyzer 2 x 30cm/11.8Inch SMA-SMA Extension Cables 1 x 10cm/3.9Inch Type-C USB Data Cable 1 x Stylus 1 x SMA-KK Connector 2 x N/SMA- 2 x SMA-J/BNC-K Adapters 1 x Spectrum Analyzer Test Probe with SMA Interface to Alligator Clip Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.