P4100 Oscilloscope Probe 100:1 2kv High Voltage 100mhz Safety Bnc Connector For Oscilloscope Adjust 1. The oscilloscope probe is an electronic component that connects the circuit under test and the input of the oscilloscope. Premium materials and advanced technology enhance feel and construction. The smooth surface is easy to use.2. High-voltage probes that can withstand 2000V, the grounding alligator reliably grounds the probe stage to safe operation and correct signal reading.3. The tip of the detachable hook is protected by a plastic sleeve. The positioning sleeve ensures the stability and reliability of the exposed tip at the test point. The 4-color identification ring is compatible with most oscilloscope probe sizes for easy channel identification.4. The high-voltage oscilloscope probe is compatible with BNC interface, digital oscilloscope, virtual oscilloscope, handheld oscilloscope, etc.5. Universal 100:1 high voltage oscilloscope testModel: P4100Bandwidth: 100MHZRise time: 35 nsAttenuation Ratio: 100XInput : 100X : 100M ohm2 %Input Capacity: 100X : 6PFMaximum Input: 100X : 2000 Working Voltage ( -p )Compensation Range: 10-35PFMaximum working voltage: 2 KV (-p)Length: 12 meterscolor:BlackMaterial:PVC+MetalPackage Contents:1 x Oscilloscope probe4 x color circleOnly the above package content, other products are not included.Note: Light and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.