1. 2.13-Inch Capacitive Touch Ink Screen, 250x 122 Resolution2. Supports 5-Point Touch And Custom Gesture 3. No Backlight Is Required, And The Display Content Of The Last Screen Can Be Maintained For A Long Time When The Power Is Turned Off.4. The Power Consumption Is Very Low, Basically Only Consuming Power When Refreshing.5. Based On Raspberry Pi40pin Gpio Interface Design, Suitable For Zero or Zero W And Other Two Main Control Boards1. Working Voltage: 3.3V2. Communication Interface: 3-Wire Spi, 4-Wire Spi3. Partial Refresh: 0.3s4. Overall Dimensions: Approximately 69.15 x 38.90mm5. Display Size: About 48.55x23.70mm6. Global Refresh: 2s7. Refresh Power Consumption: 26.4mw(Typ.)8. Point Pitch: 0.194x0.194mm9. Sleep Current: Less than 0.01ua (Near 0)10. Resolution:250x122pixels11. Viewing Angle: 17012. Touch Points: 513.Colour:As Shown14.Material:ABS Note:Different Batches May Have Differences In Product Appearance, Color, And Printed Characters, Which Will Not Affect The UsePackage Contents:1 x 2.13-Inch Touch Electronic Screen1 x Upper And Lower Shell1 x Screwdriver1 x Thermal Conductive Silicone Sheet4 x Anti- Rubber Particles2 x Flat Head ScrewsOnly the above package content, other products are not included.Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is 1-3cm.