Material: Silicone rubber + fiberglass clothSize: optionalWire length: 2MColor: as showUs standard 110v 150WEuropean/British/Australian rules 220v 150WTemperature: Constant temperature is about 100 degreesVoltage: 220V 150W, 12V 80W, 24V 120WTemperature: Constant temperature 40 degrees, 60 degrees, 80 degrees, 100 degrees, 120 degreesUsing range: All kinds of automobile fuel tank, water tank, storage battery, anti-freezing heat insulationSpecifications:1.Well waterproof performance, fast temperature rising, temperature uniformity,High thermal efficiency, well toughness2.Conform to the American UL94 level V0 flame resistant standard3.Easy to use, safe service life for ten years, not easy aging4.Different plug specifications are optional5.Usage:Product with double-sided adhesive on the back, can be directly stick on the heated products, the highest heat resistance temperature to 200, will never fall offar Engine Oil Pan Sump Tank Heater Pad Silicone oil heating Pad Engine Oil Tank Wear Protect With EU US UK AU Plug 1.Well waterproof performance, fast temperature rising, temperature uniformity,High thermal efficiency, well toughness 2.Conform to the American UL94 level V0 flame resistant standard 3.Easy to use, safe service life for ten years, not easy aging 4.Different plug specifications are optional 5.Usage: Product with double-sided adhesive on the back, can be directly stick on the heated products, the highest heat resistance temperature to 200, will never fall off6.Installation:-Use pressure-sensitive adhesive to stick it on the flat and smooth artifacts-The maximum service temperature of pressure sensitive adhesive: 150 Continuous temperature, 230instantaneous temperature. Power density is less than 0.9 W/c -Silicone rubber heater with pressure sensitive adhesive should be used in half a year after processing, otherwise it will influence on the performance of the glue using-The electric heating device must pay attention to use, its working temperature should be less than 240 , the continuous use instantaneous does not exceed 300 .-when the work temperature less than 240 , the current density is up to 3 w/c -Paste the type installation conditions, allowed working temperature less than 150 -Working voltage selection with high power high voltage, low power low voltage for the principle, special needs can be exceptions.Package Included:1 x heater