<p>The M10 GPS uses a multi-constellation GNSS powered by M10, a parallel GNSS receiver that can receive and track multiple GNSS systems.</p> <p>All four major GNSS constellations (GPS, , GLONASS and BeiDou) can be received simultaneously thanks to the multi-band RF front-end architecture.</p> <p>It also comes with an IST8310 compass, a tri-color LED indicator, a buzzer and a safety switch. There are 3 different connectors to choose from for different uses. The module has a baud rate of 115200 (previously 38400).</p> <p>The high gain 25 x 25 mm2 patch antenna provides excellent performance, and the omnidirectional antenna radiation pattern increases the flexibility of device installation. It has an active circuit for the ceramic patch antenna, a rechargeable backup battery for hot start.</p> <p>Requires PX4 1.14, 4.3, INAV 5.0.0, Betaflight 4.3.0 or newer, the status indicator driver has changed. This LED supports PX4 1.14, 4.4.0 and newer.</p> <p>GNSS Receiver:Ublox M10</p> <p>Number of Concurrent GNSS:Up to 4 GNSS,BeiDou,,GLONASS,GPS,QZSS</p> <p>Frequency Band:GPS L1, E1,GLONASS L1,BeiDou B1,SBAS L1,QZSS L1</p> <p>Compass:IST8310</p> <p>Output Protocol:UBX(),NMEA</p> <p>Accuracy:2.0m </p> <p>Nav. Update Rate:Up to 25 Hz (single GNSS) ,Up to 10 Hz (4 concerrent GNSS)</p> <p>GNSS Augmentation System:EGNOS, GAGAN, MSAS and WAAS,QZSS: L1S</p> <p>Default Baud Rate:115200</p> <p>Input Voltage:4.7-5.2V</p> <p>Port Type:JST--10P</p> <p>Antenna:25x25x4 mm ceramic patch antenna</p> <p>Power consumption:Less than 200mA @ 5V</p> <p>Operating Temperature:-40-80</p> <p>Cable Length:26cm (42cm cable purchase separately)</p> <p>Other:Tri-color LED</p> <p>Onboard Buzzer</p> <p>Safety Switch</p> <p>LNA MAX2659ELT+ RF Amplifer</p> <p>Rechargeable capacitance</p> <p>Low noise 3.3V regulator</p> <p>Due to different batches, the printed words on the product will be erent, which does not affect use.</p> <p>Colour:Black</p> <p>Material:ABS</p> <p>Package Contents:</p> <p>1 * GPS Module</p> <p>1 * Carbon Fiber Stick</p> <p>2 * Bases</p> <p>1 Set * Mounting Screws</p> <p>Only the above package content, other products are not included.</p> <p>Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +\/- 1-3cm.</p>