1. The LCD can display input/output voltage/temperature, output current/output power/output capacity/output time. 2. Digital control adjustment is precise and fast, and it is capable of boosting voltage. The output voltage can be adjusted arbitrarily between 0.6 - 36V, and the current limit can be adjusted arbitrarily between 0 - 5A. 3. There is input reverse connection protection, and the module may not burn out if reverse connected. 4. The output end is protected against backflow. There may be no need to use a backflow prevention diode when charging the battery. 5. It has a variety of software protection mechanisms, and the protection functions are adjustable. When the working parameters of the module reach the protection threshold, the output may automatically turn off. 6. Input voltage is 6.0 - 36V. 7. Output voltage is 0.6 - 36V. 8. Output current can reach a maximum of 5A. 9. Output power is 80W. 10. Voltage display resolution is 0.01V. 11. Current display resolution is 0.001A. 12. Conversion efficiency is approximately 88%. 13. There is soft start (Modules with power loads may fail to start). 14. Protection mechanisms: - Input reverse connection protection. - Output backflow protection. - Input under - voltage protection (Adjustable between 5.8 - 36V, default is 5.8V). - Output over - voltage protection (Adjustable between 0.6 - 36V, default is 36V). - Output over - current protection (Adjustable between 0 - 5A, default is 5A). - Output over - power protection (Adjustable between 0 - 80W, default is 80W). - Over - temperature protection (Adjustable between 80 - 110°C, default is 110°C). - Over - time protection (Adjustable between 0 - 100h, default is off). - Over - capacity protection (Adjustable between 0 - 60Ah, default is off). 15. Operating frequency is 120KHZ. 16. Dimensions are 79 x 43 x 48mm. 17. Color is black. 18. Material is plastic. 19. Package contents: - 1 module. - Only the above - mentioned items are included in the package, and other products may not be included. 20. Note: Light reflection and different monitors may cause the color of the item in the picture to be slightly different from the actual product. A measurement error of +/- 1 - 3cm may be allowed.