Feature: 1. The serial port camera can directly read the captured image through the serial port. It can obtain the image compression data by simply sending serial port instructions, and the image output format is compressed JPEG file format. 2. The module can currently obtain images at 800x600, 640x480, 320x240, and 160x120 resolutions. 3. Continuous sending instructions can obtain continuous image output. When the resolution is set to the lowest, continuous output can reaches a speed of about 5 frames. 4. Supporting a variety of microcontroller, function board camera module. 5. Can be directly connected for SCM, for Ardunio, for raspberry PI, for ARM, etc. Specification: Condition: 100% Brand New Item Type: Camera Module Material: Electric board Purpose: Color photography, simple image recognition, car tracking, automatic tracking, automatic control Working Voltage: 3-3.3V Camera Parameters Chip: OV2640 Photosensitive Array: 1632x1232 maximum format UXGA IO Voltage: 1.7V-3.3V Analog voltage 2.5-3.0V (internal LDO supplies 1.2V to the core) Power Consumption: TBD dormancy <20μA Temperature Operation: -30℃ to 70℃ Stable Operation: 0℃ to 50℃ Output Format (8-bit) : YUV/ YCBCR4:2:2 RGB565/555/444 GRB4:2:2 RGB Data Optical Size: 1/4in Field of View: 25° Maximum Virginity Rate: 15fps SXGA Sensitivity: 1.3V/(Lux-sec) Signal to Noise Ratio: 40 dB Dynamic Range: 50 dB Browse Mode: Line by line Electronic Exposure: Lines 1 to 1247 Pixel Area: 2.2μm x 2.2μm Dark Current: 15mV/s at 60℃ Lens Parameters: FL: 3.6mm Horizontal Field of View: 102° Minimum Distance: 20mm Format: 1/3IN Mount: M12X0. 5 Aperture: F2.0 Size: Approx. 14 x 15.7mm / 0.6 x 0.6in The output lines of serial port are: VCC, RXD, TXD and GND Wherein: VCC: 3-3.3V TX: TTL level serial port sending terminal RX: TTL level serial port receiver GND: Earth terminal. Package List: 1 x Camera Module