PCI-E to NGFF adapter card is a solid-state hard disk card with M.2 new specification interfaceCan be connected to use M.2 (NGFF) SSD as a laptop hard disk cardM.2 (NGFF) SSD is connected to the through the NGFF slot of this board for data transmissionSupport system functionAllow users to use standard SATA-IO M.2 SATA SSD to transfer to desktop or notebook computer as SATA hard diskFeatures:Colour: BlackMaterial: PCB+MetalPower supply mode: PCIE power supplySupport system functionAllow users to use the standard SATA-IO M.2 SATA SSD to transfer to a desktop computer as a SATA hard drive;M.2(NGFF) card supporting PCIE signalSupports high-speed SATA3.0/6Gbps high-speed -capacity storage interface; the speed is determined by the side of the computer motherboard, and the adapter card does not affect the performance of NGFF SSDEasy to install and does not require any driver software M.2 specification revision 0.9Support M.2 card size: 22 x 30mm, 22 x 42mm, 22 x 60mm, 22 x 80mm 2 M.2 slots, M NGFF interface, B NGFF interfaceSupport M.2 key B and M.2 key MAbout the NGFF usage of SATA signal and PCIE signal:1. Connect the 7PIN SATA on the adapter card to the SATA interface of the desktop motherboard, and convert the signal into an NGFF adapter card for SATA signals2. The following interface adopts NGFF of PCIE signal interface, which directly supports M.2 SSD connected to PCI-E3. Can support NGFF of SATA signal and PCI-E signal to work at the same timePackage Contents:1 x riser card2 x baffles1 x SATA cable2 x screwsOnly the above package content, other are not included.Note: Light reflection and different displays may cause the color of the item in the a little different from the real thing. The measurement allowed error is +/- 1-3cm.