Use: Vehicles & Remote Control Toys; Material: Composite Material; Color: Blue; RC Parts & Accessories: Crystals; Four-wheel Drive: Assemblage; Tool Supplies: Assembly Category; For Vehicle Type: Cars Model Number: for 1/10 AXIAL; Technical Parameters: Value 2; Upgrade Parts/Accessories: LED Lighting; Remote Control Peripherals/Devices: LED Lighting Features: 12 LED lights; simulation car light; simple and easy to use; far flashing, super bright; improved design of circuit board, power saving; headlight white, taillight blue, brake light red, turn light yellow; suitable for 1/10 RC cars Name: 12 LED Lighting System Kit LED Bulb Quantity: 12 Working Current: 100mA Input Voltage: 4.8V - 6.0V Connection: CH1 - Servo CH2 - Speed Controller CH3 - Receiver Suitable for: 1/10 RC Cars LED Cable Length: about 300mm Circuit Board Size: 53 x 33 x 15mm Weight: 57.2g Lights: Headlights: 4 white LED lights Connect the lighting system to CH3 on receiver: the transmitter can independently control one group of lights; another group of lights turn on when the car is running Do not connect to CH3 on receiver: one group of lights remains on; another group turns on when the car is running Turn Lights: 4 yellow LED lights With remote control direction change, the lights will flash synchronously Taillights: 2 blue LED lights, 2 red LED lights Blue lights remain on; when the car moves or brakes, blue lights turn off; red lights turn on only during braking Installation: CH2 Transmitter: Connect the servo and ESC plugs to CH1 and CH2 on the lighting system, then connect CH1 and CH2 to the receiver CH3 Transmitter: Connect the servo and ESC plugs to CH1 and CH2 on the lighting system, then connect CH1, CH2, and CH3 to the receiver Package Contents: 1 x LED Lighting Kit Note: Light reflection and different displays may cause the color of the item in the picture to differ slightly from the actual product. Measurement may vary by +/- 1-3cm.