_x000D_ _x000D_ _x000D_ LCR TC1 1.8 Inch Multifunctional TFT Transistor Tester Diode Triode Capacitor Resistor Test Meter _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ Features: Can be widely used to detect NPN and PNP transistors, capacitors, resistors, diodes, transistors, N-channel and P-channel MOSFETs, IGBTs, JFETs, thyristors, batteries, etc. Zener diodes can also be detected and have a functional self-calibration. _x000D_ After the detection is completed, point the infrared remote control at the "IR" light, and then press the button on the remote control. If the detector decodes successfully, the data code and infrared waveform will be displayed. _x000D_ One-key operation, automatic detection and shutdown, you can also press the multi-function button to turn off the detector. _x000D_ Place the pins of the components in the corresponding area, turn the small handle, the detector will automatically detect, and the final result will be clearly displayed on the backlit TFT screen. _x000D_ Instead of the usual black and white display, this detector will display the results in color. _x000D_ _x000D_ Specification: _x000D_ Power Mode: Rechargeable Lithium Battery _x000D_ Display: 3.5 x 3cm TFT screen _x000D_ Diode Range: Less than 4.5V _x000D_ Zener diode: transistor detection area: 0.01-4.5V Zener diode detection area: 0.01-20V _x000D_ Triac Range: IGT Less than 6mA _x000D_ Capacitance: 25pF- 100mF _x000D_ Resistance: 0.01-50M _x000D_ Inductance: 0.01mH-20H _x000D_ Battery: 0.1-4.5V (with battery) _x000D_ Product chip: High-performance mcu _x000D_ Note: different batches, some accessories are random, don't accept the specified accessories, will not affect the use. _x000D_ Material: plastic _x000D_ colour: White _x000D_ _x000D_ Package Contents: _x000D_ 1 x Multifunctional TFT Transistor Tester _x000D_ 1 x Electronic components set _x000D_ 1 x Cable _x000D_ 3 x Test hook _x000D_ _x000D_ Only the above package content, other products are not included. _x000D_ Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm. _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_