The Kakute H743 Wing is a full featured flight controller with layout specifically for fixed wing & VTOL applications. It has the STM32 H743 Processor running at 480 MHz and CAN Bus support, along with dual camera support & switch, ON/OFF Pit Switch, 5V, 6V/8V, 9V/12 BEC, and plug-and-play GPS, CAN, ports. MCU: STM32H743, 480 MHz, 1MB RAM, 2MB IMU: -42688P (SPI3).Baro: BMP280 (I2C4).OSD: AT7456E (SPI2).: MicroSD card slot on SDMMC2MCU: STM32H743, 480 MHz, 1MB RAM, 2MB IMU: -42688P (SPI3).Baro: BMP280 (I2C4).OSD: AT7456E (SPI2).: MicroSD card slot on SDMMC2MCU: STM32H743, 480 MHz, 1MB RAM, 2MB IMU: -42688P (SPI3).Baro: BMP280 (I2C4).OSD: AT7456E (SPI2).: MicroSD card slot on SDMMC2 7x Uarts (1,2,3,5,6,7,8) with built-in inversion.14x PWM outputs, 1x CAN, 5x ADC (Bat1/Curr1, Bat2/Curr2 and RSSI).3x (I2C1 and I2C2 for external devices, I2C4 for onboard sensors).3x LEDs for FC STATUS (Blue, Red) and 3.3V indicator (Green) USB/DFU Key Extender with USB Type-C.Dual Camera Inputs switch.5V/9V(12V) for Camera/VTX power switch.High- Current Sense (90A continuous, 220A ).Battery Voltage Sensor: 5K:25.5K (Scale 1800 in INAV, BATT_VOLT_MULT 18.18 in ) Static power 160mA@5V Color: As Shown Material: Metal Package Contents: 1 * flying drone flight controller 1 * connecting cable 1 * power board Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.