Specification: _x005f_x000D_ Origin: Mainland China _x005f_x000D_ Village material: PCB double-layer circuit board _x005f_x000D_ Size: 60.00x22.00x20.00mm/2.36x0.87x0.79inch _x005f_x000D_ Scope of application: Suitable for IDE optical drives, recorders, 3.5-inch hard drives, and video recorder hard drives _x005f_x000D_ Compatible systems: compatible with windowsXp\win7\win8 32-bit\64-bit systems _x005f_x000D_ _x005f_x000D_ Wiring method: _x005f_x000D_ 1. Some adapter cards and hard drives/optical drives require power supply. The jumper must be set to the MASTER position. to work properly. _x005f_x000D_ 2. If the power supply provided by the built-in power cord is insufficient, you can also use the 4-pin power supply on the computer power supply. _x005f_x000D_ _x005f_x000D_ Features: _x005f_x000D_ 1. Convert the IDE hard disk of the video recorder to SATA and connect it to the SATA port of the motherboard. _x005f_x000D_ 2. Convert 3.5-inch IDE hard drive to SATA, and connect it to the SATA port of the motherboard. _x005f_x000D_ 3. Convert the IDE optical drive to SATA and connect it to the SATA port of the motherboard. _x005f_x000D_ 4. Convert the IDE recorder to SATA and connect it to the SATA port of the motherboard. _x005f_x000D_ 5. Desktop 3.5-inch IDE hard drive can be connected to a SATA video recorder (please format the hard drive on the computer first). _x005f_x000D_ 6. The transferred hard disk can be used as the master disk or slave disk (you need to reinstall the system, refresh in BIOSS, etc.). _x005f_x000D_ 7. The transferred optical drive can be booted into the system. _x005f_x000D_ 8. The adapter card supports parallel hard drives with a maximum capacity of 1000G. _x005f_x000D_ 9. When using an IDE device with an adapter card, the jumper cap must be inserted into the MASTER position. _x005f_x000D_ 10. Compatible with SATA 1st generation, SATA 2nd generation, SATA 3rd generation _x005f_x000D_ _x005f_x000D_ _x005f_x000D_ Note: _x005f_x000D_ Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you! _x005f_x000D_ Please allow 1-2cm measuring deviation due to manual measurement. _x005f_x000D_ _x005f_x000D_ _x005f_x000D_ _x005f_x000D_ Included: _x005f_x000D_ 1 x IDE to SATA Converter Card _x005f_x000D_ 1 x Data Cable 1. Convert the IDE hard disk of the video recorder to SATA and connect it to the SATA port of the motherboard. 2. Convert 3.5-inch IDE hard drive to SATA, and connect it to the SATA port of the motherboard. 3. Convert the IDE optical drive to SATA and connect it to the SATA port of the motherboard. 4. Convert the IDE recorder to SATA and connect it to the SATA port of the motherboard. 5. Desktop 3.5-inch IDE hard drive can be connected to a SATA video recorder (please format the hard drive on the computer first).