GEPRC RAD VTX 5.8G PitMode/25mW/200mW/600mW/1600mW/2500mW 7-36V 2.5W FPV Transmitter MMCX Antenna for RC Drone Long Range Specifications: Model: RAD VTX 5.8G 2.5W Input voltage: DC7-36V（2-8S Battery） Output voltage: 5V@600mA Input Impedance: 75Ω Protocol: IRC Tramp Antenna interface: MMCX Cable interface: GH 1.25-6P Output power: PitMode/25mW/200mW/600mW/1600mW/2500mW Frequency group: general regional frequency group (40CH), US FCC frequency group (37CH), European EU frequency group (26CH) Video format: PAL/NTSC Microphone: Built-in microphone Mounting holes: 30.5mm x 30.5mm(M3) Size: 36.5mm x 36.5mm x 12mm Weight: 15g (without wire) Features: 2500mW high power, stable work, suitable for long range flight. The seaside non-interference pull distance test is about 10KM. Six power levels can be adjusted PitMode/25mW/200mW/600mW/1600mW/2500mW. A good two-layer board heat dissipation structure separates the power BEC and the main control, reducing interference and shielding interference. Temperature control protection function to prevent high temperature burning. Wide voltage input, support 7-36V voltage input. It has 3 regional frequency groups to meet the needs of various regions. Image transmission control protocol IRC Tramp, support OSD parameter adjustment. The on-board microphone of the image transmission, the sound of the aircraft is transmitted to the ground in real time. Two function buttons, three indicator lights, easy to operate. Mounting holes support 30.5mmx 30.5mm. Package included: 1 x GEPRC RAD VTX 5.8G 2.5W 1 x Copper tube antenna MMCX 72mm 1 x GH 1.25*6P connector cable 150cm 1 x MMCX to SMA（Internal foramen）connector 1 x Matching screw package Notice: Install the antenna before use. The temperature control protection will be activated and the power will be automatically reduced if the VTX is overheated. Please ensure good ventilation and heat dissipation when using it. When the environment is limited, you can install a cooling fan for the video transmission. The 5V output is only used for the camera or cooling fan. It is forbidden to connect the power input terminal to the 5V output port, otherwise the image transmission will be damaged.