G1/2" DN15 Brass 3 Way 220VAC Motorized Ball Electrical Valve for Flow Control Features: The electric three-way ball valve is suitable for the flow control of fan coil. Compact structure, the valve body is made of brass and the drive is powered by hysteresis synchronous motor Easy to control, the valve open by power on. After power off, the valve body is closed by itself and equipped with manual valve opening operating mechanism This motorized ball valve is mainly adopted of brass forging, reliable and durable. Ball valve and actuator for nut connection Installation, quick disassembly. Can be used in air conditioning system and plumbing systems. Specifications: Port: DN15 G1/2 Flow hole diameter: 10mm/0.39in Diameter of inner thread: 20mm/0.79in Drive motor: hysteresis synchronous motor Power consumption:≤ 7.5VA Valve body pressure-bearing: 1.6Mpa Allowable pressure difference: ≤0.13MPa Applicable media: cold water and hot water Applicable medium temperature: 2 ℃ to 95 ℃ Applicable environmental temperature: 0 ℃ to 60 ℃ ON OFF time: about 10 seconds on, about 5 seconds off Valve body connection: ZG inner pipe thread Stroke (theoretical value) : 4.0mm/0.16in Valve body: brass (forged) Valve stem: 304 stainless steel Sealing material: special rubber Drive chassis: die-casting aluminum alloy Drive cover: flame retardant ABS engineering plastic Weight: 510g Wiring method: Blue wire: open valve, brown wire: close valve, dual colors wire: Neutral wire Package includes: 1 x Motorized Ball Valve Note: Please note that the new type and old type of this product will be sent randomly, and make sure you will not mind before ordering.