1Port PoE extender can forward both ethernet and PoE power for 1 terminal equipment via Cat5 UTP cable. The 1-Port PoE extender has 2 10/100M LAN ports, among , one for power input , the other for power output. Comply with 10/100M BASE-TX, IEEE802.3af (PoE). Power input for single port is 13W. Power output for single port is 12.2W. PoE Extenders can increase the transmission distance for Ethernet data and PoE power up to 120m via Cat5 UTP cable. Automatically detects and protects PoE equipments from being damaged by incorrect installation;Plug-and Play no configuration required;It offers you great flexibility to extend the distance of PoE. Specification: PoE input: 1 RJ45 port PoE output: 1 RJ45 port Network Medium: Cat5 or better UTP cables (less than 120m/393ft) Repeater Mode: and forward Address Table: 2K Packet Buffer Memory: 48 Switching Capacity: 400Mbps PoE Standard: IEEE 802.3af Input power: 13 Output power: 12.2 Power Supply Type: 1/2+, 3/6-, Mode A, End-Span Network Protocol: IEEE 802.3i-10BASE-T, IEEE 802.3u: 100BASE-TX, IEEE 802.3x-Flow Control, IEEE 802.3af-Power over Ethernet; Regulation Compliance: FCC Part 15B, ROHS Directive 2011/65/EU, Low Voltage Directive 2014/35/EU, EMC Directive 2004/108/; Working Temperature: 0 Celsius~40 Celsius / 32 Fahrenheit~104 Fahrenheit Working Humidity: 10%~90%,No Condensation Storage Temperature: -30 Celsius~70 Celsius / -22 Fahrenheit~158 Fahrenheit Storage Humidity: 5%~90%, No Condensation; Colour:Black :plastic Size:75x37x26.5mm Package Contents: 1 * PoE Extender Only the above package content, other products are not included. Note: Light and different displays may cause the color of the item in the a little different from the real thing. The measurement allowed error is +/- 1-3cm.