Introduction It connects DJI Ronin-S to specified cameras to control the camera Lightweight and Durable, easy to carry and store It may enable the stabilizer to control compatible cameras to: Start/stop recording video Pull focus electronically Trigger auto focus Capture photos (Do not work with SONY cameras ) Note: Above functions depend on the camera and stabilizer, not our cables. Only the 'Start/stop recording video' function works for some cameras. Specification Color:Black Material: PVC Length: About 30 cm = 11.8 inch One End: MCC=Multi-Camera Control plug Another End: Type-C, also called USB-C Manufacturer: third-party, not original from DJI, replace MCC-C How to use 1. Connect the cable to Camera and Stabilizer 2. Turn on the stabilizer and select specified camera in the setting or be recognized by DJI (May not be recognized accurately but not important if it still works) 3. Switch on the camera 4. If not work, re-start the stabilizer first and turn on the camera Suitable for DJI Ronin-S stabilizer only Some of cameras with Type-C port, such as S0NY A7C, A7S III, A7 III, A7R III, A7R IV, CAN0N E0S R RP, M6 Mark II, NIK0N Z6 Z7 Z7II Z6II, PANAS0NIC GH5 GH5S, Fujifilm X-T3 X-T4, etc. Notes for use **For R/RP 1.Due to various lens focus control mechanisms, when using the Ronin-SC to pull focus, you may need to set camera focus mode to AF. 2.When switched to Photo mode, the camera won't respond to video-capturing commands; when switched to video mode, the camera won't respond to photo-capturing commands. 3.Using adapter with EF lenses will increase the latency of focus. **For GH5/GH5S/S1H