The digital attenuator can adjust the signal level of the circuit in 0.25dB steps without interrupting the circuit. It can also be used as an in-machine attenuator for instruments and equipment to adjust the power level in the test system. It has a small size. , high precision, stability and reliability. It uses OLED to display the attenuation, and the attenuation can be controlled by the host computer. Technical indicators: 1. Working frequency: LF-6GHz 2. Attenuation adjustment range: 0-31.75dB 3. Attenuation step: 0.25 (dB) 4. Insertion loss: ≤1.5dB (the insertion loss at the high-frequency end will be larger) 5. Standing wave ratio: ≤1.4 6. Attenuation accuracy: ±0.25dB Max 7. Rated power: ≤1W 8. Connector form: SMA (female, external thread, internal hole) 9. Temperature range: -10℃~+50℃ (operation) -40℃~+70℃(not operating) 10. Overall dimensions: 55 x 40 x 16.5mm (excluding the protruding part of the SMA interface, the protruding part of the SMA is 9mm) 11. Weight: 57g 12. Input and output impedance: 50 ohms Due to different batches, the appearance, color and printed words of the product may vary, which will not affect the use. Material: PCB colour: green Package Contents: 1 x Digital Attenuator Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.