ANENG Intelligent Digital Maintenance Electrician Charging Multimeter 1. Material: ABS+Silicone 2. DC voltage: 10mV~1000V 3. AC voltage (VFC): 10mV~750V 4. DC current (mA): 0.01mA~600mA 5. DC current (10A): 0.001A~10A 6. AC current (mA): 0.03mA~600mA 7. AC current (10A): 0.030A~10A 8. Resistance: 0.1~60 9. Capacitance: 0.01nF~60mF 10. Temperature: -40C~1000 11. Frequency: 10Hz-6MHz 12. Duty cycle: 0.1%~99.9% 13. Battery model: 1000mAh 3.7V lithium battery 14. VA color reverse display screen, you can see the value clearly in dark environment 15. The back support frame allows you to stand and work, making the measurement faster 16. Built-in double fuse, multi-directional anti-burn protection, automatic identification to avoid misoperation to achieve anti-burn protection, and safer current measurement 17. Press the NL key to switch to NCV mode. When AC voltage is detected, a buzzer alarm sounds. The closer the distance, the more urgent the alarm 18. In Live mode, the neutral and live wires are judged. The live wire indicator light is on and accompanied by a buzzer, and the neutral wire indicator light is off without a buzzer 19. The charging indicator light is red, and the full indicator light is green. It is equipped with a Type-c charging cable 20. Long press to turn on the flashlight, you can see the measured object clearly in a dark environment, and illuminate the front for you without fear of electric shock risks 21. The meter automatically shuts down after about 15 minutes without any operation 22. Weight: 188g 23. Size: 13.8x7x2.8cm 24. Packing list: multimeter; test lead wire; storage bag; temperature wire; charging cable; instruction manual; packaging box