Specifications:Product weight: 50+10gProduct size: 6.2*3*2.7cmProduct colour: blackProduct Material:Plastic+MetalFeatures:1.Insert the ball bar of the new leather head vertically into the hole of the rolling knife, turn clockwise to repair the edge of the leather head to cut and plane the leather head.2. Thick steel blade, durable.3.Insert the shaft vertically into the arc shaping, rotate it at will to polish the leather head into a rounded shape.4. Flat sanding, can be the first corner of the club residual glue grinding flat, will be the bottom of the new leather head uneven part of the grinding flat.5.8-in-1 function, every detail is a surprise:Head cleaning: when replacing the head, rotate the club to remove the head residue.Sharpening: Insert the club vertically into the arc shaper and rotate it at will to round off the head.Flat Sanding: Smooth out glue residue on the corners of the shaft and unevenness on the bottom of the new head.U-Shape Sanding: Steel U-shape sanding discs can be used to carefully sand the head to the appropriate curve for individual use.Edge compression: rubbing the head in the grooves increases the hardness of the edges.Shaving: Insert the shaft of a new head vertically into the hole of the reel and turn clockwise to repair the edge of the head.Tip shaping: Tilt the club against the hole and gently rotate it to create various curves.Needling: A sharp splinter is applied to the head to loosen the hardness of the head and to increase the surface roughness of the top of the head if it is too slippery.Package Include: 1*Cue Tip Shaper