Withstand Voltage: 250V Withstand Current: 20A Contact Resistance: Less than 1 ohm Lifetime: More than 1000 cycles Color: Blue Material: Plastic NAC3FCA PowerCON Power In Type A Cable Mount Connector, A-type for power-in, screw terminals The powerCON is a locking 3-conductor AC connector with contacts for line, neutral, and pre-mating ground contact. It replaces appliance couplers where a rugged, locking solution is required for a secure power connection. Attention: The powerCON is a connector without breaking capacity. Do not connect or disconnect under load or when live. Type A plug and socket is for power input to a device. NAC3MPA-1 Powercon offers a 20-amp rating in a secure-locking, compact housing, and meets current safety standards. The series provides a 3-pole connection with pre-mating earth contact and a compact design. The secure strain-relief chuck accepts cables from 5 to 15mm in diameter, and locking is achieved via the twist-lock principle with a metal latch. Cable connectors feature screw terminals (max wire size 4mm). Panel connectors have 4.8 x 0.5mm spade terminals. NAC3MP panel connectors have plain mounting holes and are airtight. This design prevents short circuits when connectors are properly wired. Package Contents: 1 set x NAC3FCA + NAC3MPA-1 plug (2 pcs) Only the above package content; other products are not included. Note: Lighting and display settings may cause slight color variations between the image and the actual item. Measurement error allowance is +/- 1-3 cm.