Input voltage: DC/5-6VOutput signal width: 800-2200usCan synchronize output control servo system and be used forComparing the performance of steering gearsCan accurately steer the servo control output signal2 microseconds (1 millisecond = 1000 microseconds), can testThe steering gear is to respond to changes.Display and PPM signal test function, input PPMSynchronization of the PPM signal while the input signal changesOutput to servo.Automatically enters manual mode (Manual) after power-on for 20 microseconds50H analog servo signal period, frequency 50HZ, rotationpotential to decrease or increase the width of theoutput pulse.Button selection Note: function switch key, cycleMode1. S-1 manual mode (Manual)2.S-2-bit mode (neutral)3. S-3 automatic mode (automatic)Button pulse width Note: Button switch function, circulationmodel1. 50H analog servo signal cycle 20us file frequency 50HZ2. The signal period of a 125H digital servo is 8US and the frequency is 125HZ.3. 250H digital servo signal cycle 4US frequency 250HZwarn:Digital or analog signal button selectionThe corresponding servo system is then plugged into the steering servo,to avoid damaged steering servoDue to different batches, there may be differences in the appearance, color, and printing of the product, which will not affect its useColour:black+blueMaterial:plasticPackage Contents:1 x Servo TesterOnly the above package content, other products are not included.Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.