①. TFT LCD Screen For with Digitizer Full Assembly, Not Supporting Fingerprint Identification ②. Before Installation Notes ③. Tips 1: Test before installation ④. When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity. ⑤. Before attempting any repair, be sure to ground yourself with an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone. ⑥. Ensure you wear eye protection and use caution not to cut your finger with the glass splinters. ⑦. Tips 2: Simulates testing ⑧. Screen replacement is a fragile product. It is suggested to test before installation. Please simulates testing, which means separate the mobile phone, connect the (motherboard + LCD or screen) with the audio cable and new replacement, power on, and finish the test. If the test is OK, please install it. If it can not show, please contact us at the first time. And please do not force it to be installed in the mobile phone. Responsibility will not be taken once the screen is installed. ⑨. Tips 3: Do not over-bend cable ⑩. Please make sure the LCD cable does not over-bend. Over 90 degrees bent will cause black display. ⑪. About the product ⑫. 1. LCD + touch screen digitizer assembly replacement part ⑬. 2. Replace your broken or unusable item with a new one ⑭. 3. Make your device look more refreshing than ever ⑮. 4. Completely fit and work ⑯. 5. Each item has been checked and in good condition before shipping ⑰. 6. Professional installation is recommended. Responsibility will not be taken once the screen is installed ⑱. 7. Note: No Fingerprint Identification