HOBBYWING V-Tail Mixer Two-way delta wing speed difference For RC airplane/ RC CAR/ RC BOAT/RC tank Product Information Item Name: HOBBYWING V-Tail Mixer For RC airplane 3D plane Aileron Specifications: This device is an advanced electronic servo mixer for "Flying Wings" or "V-Tail Aircraft". With such a device, both elevator and aileron/rudder functions can be combined together. Size: 31mm(L) * 8mm(w) * 8mm(H) Weight: 4g (Input wires are included) Mixing Rate: 1:1 (Fixed) Precision: 200 Steps 1-way ratio is 100% (usually the throttle) 2-way ratio is 100% (usually steering) Steering priority; value range limited to 1000-2000us It is suitable for the control of double motor speed difference, such as airplanes, cars, ships, etc. When there is no input in the speed difference mode, there will be no output signal. If this mode is used One-way ESC: Please set the throttle failure protection to low throttle 1000. Two-way ESC: Please set the throttle runaway protection to 1500 for the medium throttle (for example: if the throttle is 3 channels, it should be set to 1500 instead of 1000, because the runaway protection is set to 1000, after you turn off the control, it will receive and output 1000 pairs of two-way ESCs. Adjustment is full speed reverse) or use 2 channels for the throttle (fail control protection is generally 1500), or turn off the model power first and then turn off the control. other: When powered on, if the low throttle signal (PWM