COMPATIBLE LCD Screen and Digitizer Full Assembly for Xiaomi Watch S1 About the product 1. Replacement LCD screen and touch screen digitizer assembly for Xiaomi Watch S1 2. Replace your broken or non-functional screen with a new one 3. Restore your device to a like-new appearance 4. Designed to fit and function properly 5. Each unit is tested and inspected for quality before shipment 6. Professional installation is highly recommended. No responsibility will be taken after installation Before Installation Notes Tip 1: Test before installation When testing, do not remove any protective films or labels. Be cautious of static electricity. Before beginning any repair, ground yourself using an ESD (electrostatic discharge) strap to prevent damage to internal components. Wear eye protection and handle glass carefully to avoid injury from sharp edges. Tip 2: Perform a test fit Screen replacements are fragile. Test the screen before full installation. Partially disassemble the device, connect the motherboard to the new LCD or screen using the appropriate cable, power on the device, and complete testing. If the screen functions correctly, proceed with installation. If there is no display, contact the seller immediately. Do not force installation if the screen is not working. No responsibility will be taken after installation. Tip 3: Avoid excessive cable bending Do not bend the LCD cable beyond 90 degrees. Excessive bending may result in display failure or black screen.