16K DP Switch Supports 8K at 120 Hz, 4K at 240 Hz, and 1080P at 240 Hz with data transfer up to 40 Gbps. It is backward compatible with all previous DisplayPort standards. To enjoy full visual effects, connect a standard DP 16K cable. If the screen flickers during use, unplug and replug the cable and use a shorter cable connection. 16K DP 1.4 Splitter Supports 8K at 120 Hz, 4K at 240 Hz, and 1080P at 240 Hz with data transfer up to 40 Gbps. It is backward compatible with all previous DisplayPort standards. To enjoy full visuals, connect a standard DP 16K cable. Note: The total length of input and output cables should not exceed 3 meters. If it exceeds 3 meters, the signal may be shielded. BiDirection DP Switch The DisplayPort Switcher allows you to connect two DP sources to one DP display or connect one DP source to toggle between two displays. Two displays cannot be used simultaneously; use the Select button to switch between displays. When connecting to a Source or Display, you must power the splitter with the USB cable, otherwise the display may not show anything. Do not use cables longer than 3 meters for connections between the switcher and your devices. Use scenarios Scenario 1: Switch a single refresh monitor between a gaming PC and a workstation without swapping cables. Scenario 2: Drive a single resolution display from two different sources for testing, presentations, or production workflows. Scenario 3: Share a display between a laptop docking setup and a desktop PC for demos or multisource applications.