1、Strong Compatibility: This module possesses strong compatibility, it can compatible with PLC such as for Delta, for Inovance, for Xinjie, for Schneider. 2、Slave Function: Our PLC controller has for CANopen protocol slave function, integrates 1 standard for CANopen interface, supports for CANopen 401 protocol, supports setting for CANopen baud rate, node number. 3、Input and Output: This module has a DI input points, 8 channels, DO output points, 8 channels. AI input points, 6 channels, AO output points, 2 channels. 4、Parameter: This module has free configuration with load capacity, current output 0‑20MA, voltage 10V, 250 ohm load, and independent channel. 5、Wide Application: This module is widely used in various fields, for example, industrial field network data acquisition and monitoring, remote communication in coal mines, oil wells, etc., building automation and other equipment or systems. Item Type: Module Material: ABS Number of DI Input Points: 8 Channels DI Input Type: Switch Electric Shock Signal or Level Signal Signal Limited Range: DC20-28V Insulation Circuit: Optocoupler Isolation DO Output Points: 8 Channels DO Output Type: Relay Output, Normally Open Contact DO Output Capacity: 2A/Points, 8A/4 Points Insulation Circuit: Mechanical Insulation AI Input Points: 6 Channels AI Input Type: 3 Channels 0-10V; 3 Channels 0-20ma AO Output Points: 2 Channels AO Output Type: Each 0-10V or 0-20ma can choose one, independent terminal Resolution: 12 Bit CAN Interface Type: DB9 Male Baud Rate: Default 1000kbit/s (Support 20, 50, 100, 125, 250, 500, 800, 1000) Communication Format: CAN2.0A frame format, in line with ISO DIS 11898 specifications 1 x Module